Dynamic behavior and buckling analysis of thin rectangular plate rotating around its symmetrical axis 軸對稱勻速轉動狀態下矩形薄板的動態特性與屈曲分析
( 5 ) a fingerprint classification method based on singular points and central symmetrical axis is presented and realized ( 5 )給出并實現了基于奇異點和指紋中心對稱軸的指紋分類方法。
If sufficient singular points can be extracted from fingerprint image , then classify fingerprint mainly based on singular points . otherwise classify fingerprint based on central symmetrical axis 如果能提取出足夠的奇異點,則主要根據奇異點進行分類,否則利用指紋中心對稱軸進行分類。
Simplified theories are also presented for curved beams with commonly used sections , such as i - shape , channel and h section without any symmetrical axis . linear analysis is also performed in combination with finite element method 其后就常見的截面形式(單軸對稱工字形、槽形和無對稱軸的形截面) ,對所提出的曲梁理論進行簡化,并結合有限元方法求解曲梁的線性問題。
They can be found in circular cast houses of blast furnace , in oil - sealed dry gasholders and in workshops with curved cranes . cross sections of these curved members are of various types , such as il - shaped , i - shaped , channel , box and h section without any symmetrical axis 曲線梁在工業和民用建筑中也常有應用,在高爐環形出鐵場、干式煤氣柜內部結構以及某些有工藝要求的廠房?jī)?nèi),常需采用不同截面形式的環形曲梁。
The strength of convergent shock was enhanced in cylindrical and spherical geometries than in planar geometry . the bubble became more wide and big and the spike became more narrow and long . it showed in spherical implosion that the spike close to the symmetrical axis grew faster than the ring one away from the symmetrical axis 第四,利用lared一s程序模擬柱和球幾何內爆過程中rt不穩定性增長,表明收縮幾何效應對內爆過程中不穩定性的增長有重要影響,柱和球幾何中聚心沖擊波的強度大于平面情況,氣泡變得更加寬而大,而尖頂變得更加細而長。
Based on the research of influenced parameters on constant and varying depth solid web box girder before , the shear lag aroused by the parameters including width - span ratio , outstanding flange on base slab and the position of the tendons are further studied . the investigation show that shear lag values diminish along with the decease of width - span ratio and the departure from the symmetrical axis of anchor position , but outstanding flange is contrary to the former 在前人對等截面、變截面實腹箱梁剪力滯效應影響參數研究的基礎上,本文進一步對腹板開孔的連續箱梁的寬跨比、底板翼緣伸出以及預應力錨固位置改變等參數對箱梁剪力滯的影響進行研究。